Components and Parts Idea/Ad Exchange, free for members. > Northwest
> CNC and computerized equiptment
> Sml-C125W coarse thread weather resistant 1' 1000 pack
Sml-C125W coarse thread weather resistant 1' 1000 pack
KREG pocket hole screws feature a self-tapping auger point which eliminates the need to pre-drill your workpieces. Available in both a washer and pan head which sit flushly in the bottom of the pocket hole, these screws are coated in a dri-lube finish which slows oxidation and eases driving torque. Use a fine thread screw in hardwoods and a coarse thread screw in softer materials. A 1 length is standard in thick material, use a 1-1/4 screw in material and a 2-1/2 screw in 1-1/2 material. A Sun-Seal weather resistant coating is also available for outdoor applications.
The Washer Head (Maxi-Loc ) screw is our most popular head style as it provides the largest amount of surface area to seat firmly in the bottom of the pocket. Available in both fine or coarse thread, this head style is highly recommended if the material the pocket is drilled into is soft such as plywood or pine. The large washer head assures that the screw is not over driven into the bottom of the pocket.
The second available head style is the Pan Head. The pan head is slightly smaller in both head and shank diameter than the washer head screw and is a good alternative to the washer head screw if both mating work pieces are made of extremely hard woods. The pan head style is also of benefit in the 1 length as it allows one to join 1/2' material to 1/2' material and easily seat the screw head below flush.
A Fine-Thread screw is used any time you're driving the screw into a hardwood (i.e. oak, maple, walnut, cherry, hickory, ect.)
The Coarse-Thread screw has a larger thread diameter and provides greater holding power when driving a screw into soft material such as plywood, particle board, MDF, melamine, and pine.
We also offer a Hi-Lo Thread type which consists of two separate threads, one higher than the other that serves as a general purpose screw in medium hardwoods like poplar. The Hi-Lo screw is only offered in the 1-1/4' length.
