Components and Parts Idea/Ad Exchange, free for members. > Southwest
> Automation
> Goodman B1809913 B1809913S B18099-13 B18099-13S control
Goodman B1809913 B1809913S B18099-13 B18099-13S control
Goodman B1809913 B1809913S B18099-13 B18099-13S S9200U1000 Universal Hot Surface Igntion Integrated Furnace Control replacement by Honeywell S9200U1000 Universal Hot Surface Igntion Integrated Furnace Control. Controls a standard induction-type circulating fan motor. ALL ITEMS ARE BRAND NEW AND IN FACTORY SEALED CARTON WITH INSTRUCTIONS IF APPLICABLE. The S9200U1000 can be used with conventional thermostats as well as the EnviraCOM™ enabled VisionPRO IAQ and FocusPRO. The S9200U1000 Universal Integrated Furnace Control is intended for residential natural or liquid propane fueled furnaces only. The S9200U1000 EnvriaCOM™ communications capability allows its use in twinning applications and enables communication with local and remote diagnostic devices such as the QuickLook hand held device (QuickLook™ 72), EnviraLNK® web-based application and the W8735D Telephone Access Module (TAM).
• Main burner ignition using a 120V hot surface igniter.
• Flame rectification circuit to monitor flame presence.
• Monitoring of system pressure switch, high temperature limit, and rollout functions.
• Appliance operation/safety requirements controlled via microprocessor.
• Control of a standard induction-type circulating fan motor (based on appliance requirements), in response to a conventional low voltage or EnviraCOM™ thermostat.
• LED system status, performance and diagnostic indication.
• Wire harnesses provided for simple replacement of most IFCs and integration with most heating and cooling appliances.
• EnviraCOM™ communication capability to enable local and/or remote system status, diagnostics, troubleshooting, and HVAC system control. Product Specifications Back To Top
Description Universal single stage heating & cooling
Line Voltage 120Vac (97-132 Vac)
Operating Temperature (F) -40 F to +175 F
Operating Temperature (C) -40 C to +79 C
Operating Humidity Range (% RH) 0% to 95% non-condensing
Igniter Current 1.0A resistive @ 95Vac output
Thermostat Anticipator Setting (Stage 1 only) 100mA
HSI Warmup Time 17/27 or 30/30 seconds
Trial For Ignition 4, 6, or 8 seconds
Ignition Trials Three, two tries if flame is not sensed
Flame Failure Response Time 2 Seconds max @ 1µA
Heat On Fan Delay 30 or 60 seconds
Heat Off Fan Delay 60, 90, 120, or 180 Seconds
Cool Fan Off Delay 0 or 60 seconds
Gas Control Used With Any 24Vac redundant, direct ignition gas control rated at 1.5A or less. Honeywell VR8205 recommended.
Cooling Contactor Used With Any 24Vac contactor rated at 1.0A or less
Induced Draft Blower Load 2.2FLA / 25LRA max @120Vac
Ciculator Load 14.5FLA / 25LRA max @120Vac
Type of Fan Used With Standard Induction-Type Circulating Fan
S9200U1000 Universal Integrated Furnace Control Cross-Reference Guide
903106- 50024568: Main Connector & 50024565 Inducer & HSI Connector CAR33101972200 -50024568: Main Connector & 50024566 Inducer & HSI Connector
CAR50A55843 CARB1809913S- 50026393: Main Connector & 50026446 Inducer & HSI Connector
1809913- 50026393: Main Connector & 50026446 Inducer & HSI Connector
PSIB18099-13PSI- No wiring harness required
ICM CONTROLS WIRING HARNESS USED
ICM280- 50026393: Main Connector & 50026446 Inducer & HSI Connector
G951ADB1401- 50024568: Main Connector & 50024566 Inducer & HSI Connector
624557- 50024568: Main Connector & 50024565 Inducer & HSI Connector
PSI903106PSI- No wiring harness required
3100662000- 50024568: Main Connector & 50024566 Inducer & HSI Connector
RHEEM / RUUD WIRING HARNESS USED
62-24268-01- 50024568: Main Connector & 50024566 Inducer & HSI Connector
TEXAS INSTRUMENTS WIRING HARNESS USED
6DT-1- 50024568: Main Connector & 50024566 Inducer & HSI Connector
41F-5- 50026393: Main Connector & 50026446 Inducer & HSI Connector
WHITE-RODGERS WIRING HARNESS USED
50A50-209- 50024568: Main Connector & 50024566 Inducer & HSI Connector
50T35730- 50026393: Main Connector & 50026446 Inducer & HSI Connector
50A55-843- No wiring harness required
1012-925A- 50024568: Main Connector & 50024566 Inducer & HSI Connector
1012-955A- 50024568: Main Connector & 50024565 Inducer & HSI Connector
1012-83-9651B- 50024568: Main Connector & 50024566 Inducer & HSI Connector
1012-930- 50026393: Main Connector & 50026446 Inducer & HSI Connector
